# Heat Pump Installation Timberlane LA | Replacement

> Heat pump installation and replacement for Timberlane homes, one floor or both, with the attic, drain safety and parish filing in one estimate. Ask for yours.

URL: https://sweetolivenolaheatpumps.com/service-areas/timberlane/

Upstairs bedrooms losing ground every afternoon, or a stain spreading on a ceiling under the attic unit? In Timberlane we look at each system in the house, replace the one that is failing or both, and write the attic work, the drain safety and the parish filing into one estimate.

Two heat pump outdoor units beside a two-story Timberlane house.

## What brings Timberlane homeowners to us

### The upstairs can't keep up

Downstairs is comfortable and the bedrooms above are not. Before anything is replaced, we find out whether it is the equipment, the ducts or the attic heat.

### A ring on the ceiling

A stain under the attic air handler means water is getting past the drain. The pan and float switch need attention whatever else happens.

### Two systems, two ages

One unit is newer than the other. You want to know whether to replace one now and one later, or both together.

### A Gretna mailing address

The envelope says Gretna, but Timberlane is unincorporated. We confirm which office files the permit for your address.

Last updated: November 18, 2026

Downstairs holds 75°F and the bedrooms above it never get there. Maybe there’s a brown ring growing on the ceiling under the attic unit too. In a two-story house with two systems, the first question is which one is failing and why.

[Sweet Olive](https://sweetolivenolaheatpumps.com/) installs and replaces ducted air-source heat pumps in homes across Timberlane and the rest of [our service area](https://sweetolivenolaheatpumps.com/service-areas/). Timberlane is unincorporated, so the permit goes to Jefferson Parish even when the mail says Gretna. On the first visit we look at every system in the house, the attic air handler and its drain pan, the ducts on each floor and the panel. You get a written estimate that prices each system as its own scope.

If the upstairs system still runs and you want to know how long it has, start with an [inspection](https://sweetolivenolaheatpumps.com/heat-pump-inspection/). If it is failing, the [replacement page](https://sweetolivenolaheatpumps.com/heat-pump-replacement/) walks through the decision, and the [repair-or-replace guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-repair-or-replace/) helps you weigh it.

## What an upstairs replacement in Timberlane looks like

Two systems, one failing, an attic reached by a pull-down stair and a stain on a bedroom ceiling: how a Timberlane replacement stayed to one floor.

- **Location**: Timberlane, Jefferson Parish
- **Home**: Two-story home, about 2,800 sq ft, four bedrooms, two systems
- **System**: Nominal 2-ton two-stage heat pump for the upstairs
- **Scope**: Upstairs system only; downstairs system kept
- **Air handler**: Horizontal, in the attic over bedroom ceilings
- **Drain safety**: New secondary pan and float switch
- **Line set**: 45 feet, new, in a cover on the outside wall
- **Project price**: $8,600
- **Duration**: 2 working days

The setting

### Two floors, two systems

The house was a two-story home in Timberlane, about 2,800 square feet with four bedrooms, and each floor had its own heat pump. The upstairs system was the older one: its outdoor unit tripped off on hot afternoons, and a brown ring had spread on a bedroom ceiling under the attic air handler. The downstairs system still ran well.

The decision

### Replacing only the floor that was failing

Replacing both systems at once was the alternative. The downstairs unit tested sound, so we priced the upstairs one alone and left the other for later. The load calculation for the second floor supported a nominal two-ton, two-stage heat pump. The duct test found one loose branch to the bonus room; the rest of the upstairs ducts stayed.

The startup lines we checked and recorded before the upstairs system was handed over.

The work

### Through a pull-down stair

The attic opening was a pull-down stair, so we chose a horizontal air handler that fit through it and set it on a platform over a new secondary pan with a float switch. The rusted old pan came out with the old unit. A new 45-foot line set ran up the outside wall in a cover, brazed under nitrogen, pressure-tested and evacuated before any refrigerant went in.

The handover

### A dry ceiling and a cooler floor

We reconnected the bonus room branch with mastic, set the upstairs thermostat, tested the float switch by lifting it, and recorded airflow and static pressure. Jefferson Parish inspected after the work. The aim was an upstairs that kept pace with the downstairs, and a drain that shut the system off before water reached a ceiling.

## One system or both?

Two systems wear out on their own schedules, and we price them that way.

Checking an outdoor unit's electrical connections with the service panel removed.

### Testing each one

Two systems in one house do not always fail together. We test each one: the outdoor unit’s electrical parts, the refrigerant readings and the air handler. The newer system may only need [maintenance](https://sweetolivenolaheatpumps.com/heat-pump-maintenance/), while the older one needs replacing. Your estimate prices them as two separate scopes, so you can do one now and plan the other.

### Sizing the upstairs on its own

The upstairs carries more of the summer load than its floor area suggests, because it sits under a hot attic. We run the room-by-room load calculation (ACCA Manual J) for that floor alone, rather than copying the old nameplate. The [sizing guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-sizing/) shows the calculation.

## When the air handler sits above a bedroom

Attic equipment over finished ceilings needs drain safety and a way in.

### Pan, float switch and drain

An attic air handler makes water all summer. We set it over a secondary pan with a float switch that shuts the system down if the main drain backs up, so the overflow never reaches the bedroom ceiling. Connections are sealed with mastic, and we test the switch at startup by lifting it.

### Getting equipment into the attic

Many attics are reached through a pull-down stair. We measure that opening and the path to the platform on the first visit, then choose an air handler that fits through. The [installation process guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-installation-process/) shows how the work days run.

An air handler with its condensate line and trap visible at the base.

Ducts on the hot side of the house

Upstairs ducts run through the attic, the hottest place in the house on an August afternoon. A loose branch there loses cold air before it reaches the room, so we test those runs for leakage and static pressure before we plan to reuse them. The [ductwork guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-ductwork/) explains the tests, and loose or crushed runs go on your estimate as [ductwork repair](https://sweetolivenolaheatpumps.com/heat-pump-ductwork-repair/).

## Permit, mailing address and electric account

Timberlane's paperwork follows the parish, not the post office.

Timberlane is a compact unincorporated community of about 1.5 square miles, and many of its streets carry Gretna mailing addresses. Heating and cooling work here is filed with the Jefferson Parish Building Regulatory Division before the work, and the parish inspects afterwards. [Gretna](https://sweetolivenolaheatpumps.com/service-areas/gretna/), on the other hand, is its own city with its own permit office, and so is a mailing address inside its limits. Your estimate states who obtains the permit. The [permit guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-permits/) compares the offices.

Timberlane homes are generally on Entergy Louisiana accounts. The Energy Smart rebate belongs to Entergy New Orleans accounts, so we confirm your account before any incentive comes into the budget.

An outdoor unit on a level pad with its disconnect, the part of the job an inspector sees first.

## Pricing a Timberlane replacement

Each system is a line of its own.

**Sweet Olive's typical range for a residential ducted heat pump replacement is $4,250 to $11,750.** We set your price after the site visit and write it into your estimate line by line, with each system and its attic work shown separately.

What moves a Timberlane price

- **One system or two.** Each has its own equipment, line set and startup.
- **Attic access.** The opening, the platform and the air handler size that fits.
- **Drain safety.** A new secondary pan and float switch over a finished ceiling.
- **Line-set length.** Upstairs units often need a longer run down the outside wall.
- **Ducts.** Reconnecting a branch, or replacing runs that fail the test.

## How a Timberlane job usually runs

Five steps, whether we replace one system or two.

1. Tell us about each system The address, which floor is the problem, and photos of both outdoor unit labels if the house has two systems.
2. Visit, floor by floor Rooms on each floor, the attic air handler and its pan, the ducts, the panel and both outdoor units.
3. Written estimate Each system priced as its own scope, with the attic work, drain safety, permit steps and exclusions listed.
4. Permit and work days The permit is handled as your estimate states, then the work days, with the stairs and upstairs rooms protected.
5. Startup and inspection Float switch tested, airflow and charge recorded, thermostats set, then the Jefferson Parish inspection.

## Around Timberlane

Permits: Jefferson Parish. Electric service: Entergy Louisiana, confirmed for your address.

Neighborhoods

- Timberlane Estates
- Streets around Timberlane Country Club
- Timberlane Drive

Landmarks

- Timberlane Country Club

Main routes

- Timberlane Drive
- Belle Chasse Highway

Timberlane and the communities around it that we serve. [Open the area in Google Maps](https://www.google.com/maps/search/?api=1&query=Timberlane%2C%20Louisiana)

## Questions from Timberlane

### My address says Gretna. Does the City of Gretna issue the permit for a Timberlane house?

Usually not. Timberlane is an unincorporated community in Jefferson Parish, so heating and cooling work is filed with the parish Building Regulatory Division, even when the mailing address reads Gretna. The City of Gretna runs its own permit office for addresses inside its limits. We confirm which one applies before writing your estimate.

### What does replacing just the upstairs system cost in Timberlane?

A single system falls inside our typical range for a residential ducted heat pump replacement, $4,250 to $11,750. An upstairs unit adds attic factors to the price, such as the air handler size that fits the attic opening, a new secondary pan and float switch, and a longer line set. We set your figure after the visit and list each item.

### Should I replace both systems at the same time?

Only if both need it. When one system tests sound, we price the failing one alone and tell you what we found on the other, so you can plan its replacement later. Replacing both together saves a second set of work days, and some owners prefer that, so we can price it either way.

### Why is there a water stain under my attic unit?

An attic air handler makes condensate all summer. If the main drain clogs and the secondary pan is rusted through or has no float switch, water reaches the ceiling below. A stain doesn't prove which part failed, so we check the drain, the pan and the switch before recommending a fix.

### Can a new air handler fit through a pull-down attic stair?

Often, if the equipment is chosen for it. We measure the attic opening and the path to the platform on the first visit, then pick an air handler that passes through. If nothing that suits the house fits, the estimate says how the opening is handled.
