# What Belongs on a Heat Pump Maintenance Checklist?

> What a heat pump maintenance visit checks, what you can safely do between visits, a New Orleans calendar of care, and the questions to ask before you book one.

URL: https://sweetolivenolaheatpumps.com/guide/heat-pump-maintenance-checklist/

A maintenance visit keeps a working system working. Knowing what it covers, and what is yours to do between visits, makes it worth booking.

The same heat pump with the vine cut back and the coil rinsed clean.

Last updated: November 18, 2026

The short answer

A heat pump maintenance visit checks the filters, the coils we can reach, the condensate drain and float switch, the electrical connections and how the controls and system run, then records what it found. Between visits, you change or clean the filter, keep the outdoor unit clear and watch the drain. Anything electrical or refrigerant stays with the technician.

Key takeaways

- The visit is a set of checks with a written record, not an open-ended repair.
- In this climate the condensate drain and float switch matter as much as anything on the list.
- Filters, a clear outdoor unit and an eye on the drain outlet are yours between visits.
- ENERGY STAR advises a pre-season check each year, cooling in the spring and heating in the fall.
- A repair found on the visit is priced on its own, and you decide.

A heat pump in New Orleans works hard for most of the year, and much of that work is pulling water out of the air. Maintenance is how the drain, the coils and the controls keep up. A good visit is a set of checks with a record you can use later, not a quick look and a sticker.

[Sweet Olive](https://sweetolivenolaheatpumps.com/) maintains ducted heat pumps across New Orleans through our [heat pump maintenance](https://sweetolivenolaheatpumps.com/heat-pump-maintenance/) service. This guide sets out what a visit checks, what you can safely do between visits, and how to tell when you need a repair visit instead.

## What the visit checks

Each check answers a question about how the system is running. The record lists what was checked and what was found.

| Check | What it tells you | Why it matters here |
| --- | --- | --- |
| Filters | Whether air moves freely through the system | A clogged filter cuts airflow, which dries the air less and works the blower harder |
| Coils we can reach | Whether dirt is blocking heat transfer indoors and out | Pollen, leaves and dust load the coils through a long cooling season |
| Condensate drain, pan and float switch | Whether the water from the coil leaves the house | The coil drains water for most of the year; a blocked drain trips the float switch or leaks |
| Electrical condition | Whether connections are tight and parts show heat or wear | Loose connections and worn parts give way under heavy load, and August is the heaviest load of the year |
| Operating controls | Whether the thermostat calls cooling, heating and backup heat correctly | A control set up wrong can run the heat strip on mild mornings |
| How the system runs | Whether it starts, runs and shuts off properly | A changed sound or a short cycle is easier to catch on the visit than in August |

The checks on a maintenance visit, what each tells you, and why it matters in this climate.

### What the visit price covers

What the visit includes sets its price, and the equipment and the access shape it too. We tell you what the visit covers when you book, so the checks and the price match.

**Sweet Olive's typical range for a residential heat pump maintenance visit is $70 to $200.** The estimate lists each check before we book it. A repair found on the visit is priced separately, and you decide whether to go ahead.

A maintenance visit record: filters, accessible coils, condensate drainage, electrical condition and operating controls, each with what was found.

## Yours to do, and ours

Some checks are safe and useful for you between visits. Anything behind a panel stays with the visit.

Safe for you between visits

Look, clear and change; nothing opened.

- Change or clean the filter on the schedule its maker gives
- Keep plants, leaves and stored items back from the outdoor unit
- Glance at the drain line outlet on summer afternoons
- Keep supply registers and the return grille open and clear
- Note new sounds, smells or water, with the date

Leave for the visit

Behind a panel, or on a wire or a refrigerant line.

- Opening the outdoor unit or the air handler
- Cleaning the coil fins
- Clearing a blocked drain inside the air handler
- Anything to do with refrigerant
- Electrical parts, capacitors and the disconnect

If a breaker trips or the float switch shuts the system off, note it and call rather than resetting it again and again.

An air handler in a closet; the filter slot and the drain line are the parts you will see most often.

### The filter is the one job that matters most

ENERGY STAR advises inspecting the filter monthly and cleaning or changing it as needed. In a house with pets, nearby work or a long run of hot weather, it fills faster. Write the size and the date on the frame so the next change is quick.

### Watch the drain in summer

On a hot afternoon a working drain line drips steadily outside or into its drain. A dry outlet with the system running, water in the secondary pan, or a float switch that shut the system off are worth a call. Our [humidity guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-humidity-new-orleans/) explains why the drain does so much here.

## A New Orleans year of care

The calendar here leans toward cooling, with a short heating season and storm months in between.

| When | Yours to check | What a visit focuses on |
| --- | --- | --- |
| Spring, before the heat | Filter; clear the outdoor unit after winter | Cooling: coils, drain and float switch, electrical condition, controls |
| Summer | Filter more often; the drain outlet on hot afternoons | Called visits for drainage or comfort problems |
| After a storm | Debris around the outdoor unit; any sign floodwater reached the equipment | If water reached the outdoor unit or air handler, a check before it runs again |
| Fall, before the cold | Filter; thermostat set to heat | Heating: reversing valve, defrost, heat strip and the controls that call it |

What to check across the year, and what a visit focuses on in each season.

### After floodwater

FEMA guidance notes that heating and cooling equipment isn’t designed to withstand flooding. If water reached the outdoor unit, the air handler or the wiring, leave the system off and have it checked before switching it back on. Our [warning signs guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-warning-signs/) lists other reasons to switch off.

A raised house with its outdoor unit beside the steps; after a heavy storm, check the ground around the unit before running it.

## Questions to ask before you book

A few questions make sure the visit you book is the visit you need.

Ask about

- **Which checks the visit includes,** listed before you book.
- **What the record will show:** the equipment, the checks made, the readings and anything recommended.
- **How a repair found on the visit is handled:** explained, priced on its own and decided by you.
- **What access is needed:** the attic, the closet, the side gate, pets.
- **Whether the filter is part of the visit,** and which size the system takes.

A wall control; the visit checks that it calls cooling, heating and backup heat as the equipment expects.

### When maintenance isn't the right visit

If the system has stopped, blows warm air in cooling, leaks water or makes a new noise, book a diagnostic visit through [heat pump repair](https://sweetolivenolaheatpumps.com/heat-pump-repair/) instead. A recurring problem treated as routine maintenance tends to come back. Buying a house, or want facts before deciding? An [inspection](https://sweetolivenolaheatpumps.com/heat-pump-inspection/) answers a different question.

### Keeping the record useful

Keep each visit’s record with the model and serial numbers and the manuals. Readings from one visit to the next show change before it becomes a failure, and they help when you weigh [repair or replacement](https://sweetolivenolaheatpumps.com/guide/heat-pump-repair-or-replace/) later. Our [components guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-components/) names the parts on the record.

An outdoor unit on its pad, with the label that carries the model and serial numbers for the record.

## Three more questions

### Does the visit check the heat strip if we barely use the heat?

It should, because the strip and the controls that call it sit idle for most of the year and the first cold morning is a poor time to find a fault. Checking that the controls call heating and backup heat correctly is part of the operating-controls check, and a fall visit is the natural time for it.

### Which filter should I buy for my heat pump?

The size and type the equipment and its filter slot are made for, which is printed on the filter in place now or listed in the manual. A thicker or denser filter than the system was set up for can restrict airflow. If you want better filtration, ask us at the visit, because the blower and the return have to suit it.

### Can a maintenance visit fix rooms that feel damp?

Sometimes. A clogged filter, a dirty indoor coil or a fan left on between cycles can all leave rooms clammy, and the visit checks each of them. Damp rooms that persist after that usually come from airflow, duct leaks or a system that short cycles, which needs a diagnostic visit rather than more maintenance.
