# What Should You Collect Before a Heat Pump Estimate?

> The papers, photos and answers to gather before a heat pump estimate visit in New Orleans, and why a rebate window makes some urgent. Then ask us for a visit.

URL: https://sweetolivenolaheatpumps.com/blog/what-to-collect-before-a-heat-pump-estimate/

A rebate program's funding period and its application window both run on their own clock. Gather a few things before the estimate visit and nothing about the paperwork gets missed later.

Estimate pages and a highlighter on a kitchen table in a New Orleans home.

Last updated: November 18, 2026

A heat pump estimate is only as good as what it is built from. [Sweet Olive](https://sweetolivenolaheatpumps.com/) installs and replaces ducted heat pumps across New Orleans, and our first visit measures the rooms, the ducts, the panel and the outdoor spot. What we can’t measure is what you know: how the house behaves, what has been repaired, which account pays the electric bill. Gathering that before the visit takes an evening and makes the [written estimate](https://sweetolivenolaheatpumps.com/guide/heat-pump-cost/) sharper.

There is also a calendar reason. Rebate programs run in funding periods and set deadlines after the work, so the paperwork is easier to have ready than to chase afterwards.

## Why the rebate calendar matters

A rebate is decided by the program's rules and your account, never by the estimate.

If you have an Entergy New Orleans residential account and you are replacing a system, the Energy Smart program offers $200 to $250 per qualifying air-source heat pump, tiered by its SEER2 and HSPF2 ratings, for qualifying equipment installed by a participating contractor. The program form asks for the application within 45 days of the work, within the program’s current funding period, and funds are limited.

That is why the account matters before the estimate. The program sets which accounts, projects and efficiency ratings qualify, so we check your account and the proposed equipment against its current rules before any rebate goes into your budget, and we never count one as certain. The [rebates guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-rebates/) explains the checks.

A wall control: the model and settings are worth a photo before the visit, along with the equipment labels.

One federal change to know

The federal 25C tax credit no longer applies to equipment placed in service after December 31, 2025, according to IRS guidance. Don’t build a budget around it.

## What to gather about the house

Five things only you know, and what each one changes in the estimate.

| What to gather | What it changes |
| --- | --- |
| The rooms that bother you, and when | Where we measure first, and whether the answer is equipment, airflow or a return path |
| Repair and maintenance records | Whether a part has failed before, and what the last technician measured |
| Any past changes to the house | An enclosed porch, a new room or new windows change the load calculation |
| The electric bill’s first page | The account holder, the service address and the utility, for rebate checks |
| How long you plan to stay | Whether a higher efficiency tier or staging is worth it to you |

What to gather before the visit and how each item shapes the estimate.

Closed rooms, enclosed porches and attic conversions are easy details to forget, and each one changes the [room-by-room sizing](https://sweetolivenolaheatpumps.com/guide/heat-pump-sizing/) the system is chosen from. If you rent out part of the house or share a wall with a neighbour, mention that too: it changes who approves the work and where equipment can sit.

## What to photograph

Photos from where you stand. Nothing here needs a panel opened or a cover removed.

- **Each room**: windows, sun and ceiling height for the load calculation
- **Attic opening**: headroom and joists
- **Return location**: where a central return can draw air
- **Electrical panel**: rating, open spaces and existing load
- **Outdoor spot**: footing and drainage
- **Thermostat**: on an inside wall

The stops on our first visit; your photos let us plan each one before we arrive.

### The equipment labels

The data plates on the outdoor unit and the indoor air handler give the make, capacity class, refrigerant and electrical data. Our post on [reading an equipment label](https://sweetolivenolaheatpumps.com/blog/reading-a-heat-pump-equipment-label/) shows what each line means.

### The electrical panel

The label inside the panel door and the breaker directory, with the cover left on. They tell us the panel’s rating and whether there are open spaces for new circuits; the [electrical readiness guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-electrical-readiness/) explains why that matters.

### The access

The attic hatch or stairs, the crawlspace opening on a raised house, the side yard and any gate. Access sets how equipment comes in and out, and it shows up in the labor line.

## What we bring to the visit

Your part is the history. Ours is the measuring.

- A room-by-room load calculation before we choose capacity.
- Leakage and static-pressure tests on any ducts we might reuse.
- A look at the panel, the outdoor spot and the thermostat.
- A written estimate naming the equipment, the duct layout, the electrical work, the permit steps and the exclusions, priced line by line.

The permit route comes from your address, and the estimate states who obtains it; the [permits guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-permits/) covers each office. If you want to see the whole sequence from removal to startup, read the [installation process guide](https://sweetolivenolaheatpumps.com/guide/heat-pump-installation-process/). The [estimate worksheet](https://sweetolivenolaheatpumps.com/resources/) puts this whole list on one printable page, and when you are ready, [request your estimate](https://sweetolivenolaheatpumps.com/estimate/).
